Print color basics

Which CMYK profile and ink limit should I use for printing?

Updated · 3 min read

Short answer: use the paper standard and ink limit your printer gives you. If they don’t say, GRACoL 2013 is common in North America and Fogra 39 in Europe, and a 300% ink limit suits most presses. Those are also CMYKflow’s defaults.

What a CMYK profile does

The same color needs different amounts of ink on different papers and presses. A CMYK profile describes one of these printing conditions, so that converting your design to CMYK gives the printer numbers that fit their press. When you convert with the wrong profile, the file still prints, but colors and dark areas can come out a little different from what you expected.

Profiles for offset printing on coated paper are standardized, which is why printers can name them in one word.

The four paper standards in CMYKflow

Paper standardWhere it is commonInk limits you can choose
GRACoL 2013 (CRPC6)North America240, 260, 280, 300, 320%
Fogra 39 (ISO Coated v2)Europe, long established240, 260, 280, 300, 320%
Fogra 51 (PSO Coated v3)Europe, newer240, 260, 280, 300%
Fogra 27 (ISO Coated)Europe, older240, 260, 280, 300, 320, 340%

All four are for coated paper. CMYKflow does not offer uncoated paper profiles; if your job is on uncoated paper, ask your printer how they want the file.

If you don’t change anything, CMYKflow uses Fogra 39 for visitors in Europe and GRACoL 2013 elsewhere, with a 300% ink limit.

What the ink limit means

Each point of a CMYK print is a mix of up to four inks, each from 0 to 100%. The total ink coverage adds them up, so the theoretical maximum is 400%. No press wants that much: wet ink dries slowly, smudges and can mark the next sheet. So printers set a limit, usually somewhere around 300%.

  • 300% suits most presses, and it is the default.
  • 260–280% is what some printers ask for on faster presses or thinner paper.
  • 320–340% is only offered where the paper standard allows it.
  • 240% is offered with every paper standard. Choose it only if your printer asks for it: at 240%, very dark colors may come out slightly less accurate than at 260–300%.

Converted colors are capped at the ink limit you choose, and the converted file carries the paper standard as its output intent, so the printer can see what it was made for.

When your printer gives you numbers

  1. They name a profile (for example “Fogra 39” or “ISO Coated v2”, which is the same thing): choose it.
  2. They name one CMYKflow doesn’t have: ask which of GRACoL 2013, Fogra 27, Fogra 39 or Fogra 51 they accept.
  3. They give an ink limit (“max 300%”, “TAC 280”): choose that number, or the next one below it.
  4. They give nothing: keep the defaults and tell them what you used when you send the file.

How to set it in CMYKflow

On cmykflow.com/less-ink, the settings summary in the converter shows what the next upload will use. Click Change next to it to pick the paper standard and ink limit (and to save them as your default in this browser), then upload the PDF. To try another combination on a file you already uploaded, use More versions on its card: each version shows its ink figures and a free preview, so you can compare before you download.

Both functions use the paper standard you choose: Less ink for press, which reduces the ink in dark and neutral areas and converts to CMYK, and CMYK only, which just converts the colors.

Want to see how much ink your PDF has right now? Open it in the free Ink Checker: it runs in your browser and nothing is uploaded.

Frequently asked questions

Which CMYK profile should I use if my printer doesn't say?

Ask them first; it takes one e-mail. If you get no answer, GRACoL 2013 is common in North America and Fogra 39 in Europe, both for coated paper. CMYKflow picks one of these for you by region, with a 300% ink limit.

What is the difference between Fogra 39 and Fogra 51?

Both are European standards for offset printing on coated paper. Fogra 39 (ISO Coated v2) is the long-established one; Fogra 51 (PSO Coated v3) is the newer one, made for today’s coated papers. Use the one your printer names.

What does an ink limit of 300% mean?

It is the most ink allowed at any one point, adding up cyan, magenta, yellow and black. 300% suits most presses. If your printer gives a lower number, choose that number.

My printer asked for 240%. Can CMYKflow do that?

Yes. CMYKflow offers 240% with every paper standard. Choose it only if your printer asks for it: at 240%, very dark colors may come out slightly less accurate than at 260–300%.

Does CMYKflow have uncoated paper profiles?

No. It converts to coated-paper standards only: GRACoL 2013, Fogra 27, Fogra 39 and Fogra 51. For uncoated paper, ask your printer how they want the file.