Bleed, crop marks and print checks
Crop marks or no crop marks: print shop vs online printing service
Short answer: it depends on who prints it, and their instructions decide. As a rule of thumb, many print shops expect crop marks, while many online printing services want a file with bleed and no marks. A home or office printer needs neither.
Why the two differ
A print shop usually has someone who opens your file and arranges it on a press sheet. Marks show them at a glance where the cut goes.
An online service usually takes your file through an automated upload that compares the page with the product you ordered. It may expect the page to be exactly the finished size plus bleed. A page enlarged for marks can then be flagged as the wrong size, or the marks can end up treated as artwork. Each service sets its own rules, so read its file requirements before you upload.
What each choice does to the file
Here is an A4 job with 3 mm bleed in each case. The cut and the artwork stay the same. Only the page around them changes:
| File | PDF page | Finished size after cutting |
|---|---|---|
| Bleed, no marks | 216 x 303 mm | 210 x 297 mm |
| Bleed and crop marks | 248.1 x 335.1 mm | 210 x 297 mm |
| No bleed, no marks | 210 x 297 mm | Not cut, or printed as is |
Marks and bleed are separate. Marks say where to cut, and bleed protects the edge from a shift in that cut. Turning off marks does not remove the bleed.
The Print for setting
Print-Ready starts from the Print for choice. It sets usual values, and you can change any of them:
| Print for | Crop marks | Bleed | Safe area | Choose it when |
|---|---|---|---|---|
| Print shop | On | 3 mm or 1/8 in | 3 mm | A person at a local or commercial printer handles your file |
| Online printing service | Off | 3 mm or 1/8 in | 3 mm | You upload the file to a website that prints it |
| Booklet, saddle-stitched | On | 3 mm or 1/8 in | 5 mm | Stapled booklets. It also checks for a page count in multiples of 4. It does not arrange the pages for printing. |
| Home / office printer | Off | None | 5 mm | You print it yourself and do not cut it |
Print shop is the starting choice. These values are defaults in this tool, not rules from your printer, so a number from your printer overrides them. The trim and bleed boxes are set whichever you choose, so the file says where the cut is even without marks.
What to ask
If the instructions do not cover it, you can copy these questions:
- Should the PDF include crop marks, or only bleed?
- What exact PDF page size do you expect for this product?
- Do you read the trim box in the PDF, or do you need something else to find the cut?
- Do you want marks in registration color or in black only?
If you cannot get an answer
Look at how the job gets to the printer. If it goes through an upload form with a product and a size, a file without marks is the more common expectation. If you email it to a person, marks are often welcome. That is a judgment call, so keep both versions and you can send the other one if the first is questioned. To make the marked version, see how to add crop marks.
Frequently asked questions
If I remove crop marks, do I still need bleed?
Usually yes. Marks only show where to cut. Bleed is the extra artwork past the cut. An online service that does not want marks often still wants bleed.
How does the printer know where to cut without marks?
From the trim box inside the PDF, or from the page size and the bleed they told you to use. Print-Ready sets the trim box with or without marks.
Can I make one file with marks and one without?
Yes. Change the setting and create another version from the same file. Each file can currently have up to 8 versions, counting Less Ink versions too.