Bleed, crop marks and print checks
Saddle-stitched booklets: why the page count must be a multiple of 4
Short answer: a saddle-stitched booklet is made from sheets folded in half and stapled through the fold, and each sheet makes 4 pages. Two pages sit on the front of the sheet and two on the back. So the total page count is a multiple of 4: a sheet cannot be folded into half a page.
The count, worked out
Divide your page count by 4. A whole number is the number of sheets. Anything else means you need to change the count.
| You have | Divided by 4 | Options |
|---|---|---|
| 8 pages | 2 sheets | Fine |
| 10 pages | 2.5 | Add 2 for 12, or cut 2 for 8 |
| 15 pages | 3.75 | Add 1 for 16 |
| 18 pages | 4.5 | Add 2 for 20, or cut 2 for 16 |
| 24 pages | 6 sheets | Fine |
Blank pages count. If you are 2 short, a blank page or two is a common choice. The inside of the back cover is an easy place for one, or use a notes page or an ad instead of leaving it empty. Some printers add blanks for you, so check before you redesign. Other kinds of binding have different rules, so this count is only for saddle stitching.
Three ways to miscount
- Forgetting the cover. When the cover is the same paper as the inside, it is part of the same count. A heavier cover is often quoted separately ("24 pages plus cover"), and it has 4 sides of its own. Ask which way your quote works, and whether to send one PDF or two.
- Exporting spreads. A 12-page booklet exported as spreads can have 6 or 7 PDF pages. Many printers want single pages in reading order, so check before you export.
- Stray pages. A leftover blank page at the end of a design file changes the count. Scroll through the PDF.
Why booklets need a bigger safe area
The sheets nest inside each other, so the middle pages stick out a little further at the open edge. This is called creep. When the booklet is trimmed flat, those middle pages lose a little more at that edge than the cover does. The effect grows with more pages and thicker paper. Text or page numbers close to that edge can end up too close, or get cut.
Print-Ready uses a 5 mm safe area for booklets by default, against 3 mm for print shop and online jobs. It does not adjust pages for creep. That is done when pages are arranged for printing, so ask your printer. More on this in the safe area guide.
What Print-Ready does for a booklet
Choose Booklet, saddle-stitched under Print for. Then:
- It checks that the PDF's page count is a multiple of 4. If not, the line appears under Change in your design. Under the other Print for choices, the page count is not checked.
- It applies the 5 mm safe area, adds crop marks and bleed by default, and handles each page as a page to be cut on all four sides. Text close to the spine is flagged too, as the check does not know which side the fold is on.
- It does not impose. Pages stay in the order they are in, one per PDF page. Arranging them into sheets is the printer's step.
A clean count does not prove the pages are in the right order, or that the file is single pages. Page through it yourself.
What to ask your printer
- "Do you want single pages in reading order, or spreads?"
- "Is the cover part of the page count? One PDF or two?"
- "How much should I keep text from the edges for this page count and paper?"
- "Art runs across the center of some spreads. How should I set that up?"
Frequently asked questions
Does the cover count toward the page count?
Usually, yes. A cover has 4 sides: front, inside front, inside back and back. Some printers quote the cover separately, for example 24 pages plus cover, so ask how they count and whether they want one PDF or two.
Can Print-Ready add the missing pages?
No. It reports the count and you add or remove pages in your design. It also does not impose the pages, so it does not arrange them into printing order.
Should I send single pages or spreads?
Many printers want single pages in reading order, but ask yours. The check counts PDF pages, so a file exported as spreads gives the wrong count.
What is the safe area for a booklet?
Print-Ready uses 5 mm by default for saddle-stitched booklets, instead of 3 mm. That is a default, not a standard. You can change it, and your printer may ask for more on a thick booklet.