Bleed, crop marks and print checks

Trim box and bleed box in plain language

Updated · 3 min read

Short answer: the trim box is a rectangle stored in a PDF that says where the page is cut. The bleed box marks the area kept for printing around that cut, normally the finished size plus bleed. You cannot see them on the page, and if they are missing, the printer has to guess, usually from the page size.

The boxes you are likely to meet

A PDF page can carry up to five rectangles. For printing, think of them as nested, from the outside in:

BoxIn plain wordsWho cares
Media boxThe whole PDF page, including any marksEveryone. It is the page size a viewer reports.
Crop boxThe part of the page a viewer shows and a desktop printer printsViewers and desktop printing. Print workflows usually rely on the trim and bleed boxes instead
Bleed boxThe area of the page meant to be kept when printing, normally the finished size plus bleedPrinting systems
Trim boxThe finished size: where the page is cutPrinting systems, which often rely on it
Art boxThe area of the meaningful contentRarely used in this kind of job

A real example

Here is an A4 page with 3 mm bleed and crop marks, as set by Print-Ready. PDF boxes are stored in points, 72 to the inch, measured from the bottom-left corner of the page:

BoxSizeStored as (left, bottom, right, top, in points)
Media box248.1 x 335.1 mm0, 0, 703.28, 949.89
Bleed box216 x 303 mm45.5, 45.5, 657.78, 904.39
Trim box210 x 297 mm54, 54, 649.28, 895.89

If a printer asks whether your file has "a trim box of A4", they mean that the middle rectangle measures 210 x 297 mm, however big the page around it is.

What goes wrong without them

  • A bare page with bleed. A 216 x 303 mm page with no trim box could be read as an unusual finished size, with no bleed at all.
  • A wrong trim box. This one is harder to spot, since a box left behind from an earlier size looks correct to software, and a system that trusts it cuts in the wrong place.
  • Marks with no trim box. A person can read the marks, but an automated system may not.

How to check yours

Drop the PDF on Print-Ready. The check reads the boxes in your browser. It reports one of these:

  • Cut line not set, with "The file doesn't say where to cut". The trim box is missing.
  • Cut line not set, with "The file marks the cut but not the bleed area around it". Only the bleed box is missing.
  • Trim and bleed boxes under Passed. Both are there. That says they exist, not that they are the right size, so compare Cut size with your order. If you typed a finished size, this row passes because Print-Ready will set the boxes for you.

When Print for is set to a home or office printer, or the bleed is set to none, this check does not flag missing boxes, since nothing is cut.

How to set them

In your design tool: exporting with bleed often writes both boxes. Export settings differ between tools, so look at the current export options.

On a finished PDF: Print-Ready sets them when it creates the file, and you do not type any coordinates. It decides where the cut goes as follows:

  1. If you set a finished size, the cut is that size, centered on the page. See setting the finished size.
  2. If not, and the file has a usable trim box, it uses that.
  3. If not, the visible page is taken as the finished size, so a page that already includes bleed needs a finished size from you.

The new file has a media box, trim box and bleed box, and the crop box and art box are removed. Your printer may have its own rule on boxes, so a good question to ask is: "Which PDF boxes does your workflow read, and what size should the trim box be?"

Frequently asked questions

Can I see the boxes when I open the PDF?

Not in a normal view. They are numbers stored in the file. You need a tool that reads them, and some PDF viewers can display them through a setting.

Do the boxes change my artwork?

No. A box on its own does not move or add artwork, and a bleed box around white space is still white space. Print-Ready builds the bleed artwork in a separate step.

Why are the crop box and art box removed?

Print-Ready rebuilds the page around the cut, so it removes them to leave the page size, trim box and bleed box as the only instructions. A leftover crop box could hide part of the new page in some software.