Bleed, crop marks and print checks

Figma PDF with bleed and crop marks

Updated · 3 min read

Short answer: Figma's help lists no bleed or crop marks option at the time of writing, so check the current export panel. You can get them in two ways: export the frame at the finished size and let Print-Ready make the bleed from the edge, or make the frame larger with real artwork in the bleed and tell Print-Ready the finished size. Print-Ready can add crop marks either way.

If you export with the CMYKflow plugin for Figma, bleed and crop marks you already drew in the frame are kept as they are; the plugin reduces the ink and converts to CMYK, but does not add bleed. Add bleed afterwards in Print-Ready if the frame has none.

Pick a route

Route A: finished-size frameRoute B: larger frame
FrameThe finished sizeFinished size plus the bleed on all four sides
Bleed comes fromThe page edge: mirrored outward by default, or picture edges continued with Smart extend (a flat color stays the same color)Your own artwork
Print-Ready settingCut size: As in the fileCut size: the real size or Custom size
SuitsFlat backgrounds, finished files, soft photo edgesFaces, patterns or detail running off the edge

For route B, add the bleed twice to each dimension. These sizes use 3 mm bleed, a common value; use what your printer asks for.

Finished sizeFrame with 3 mm bleed
A5, 148 × 210 mm154 × 216 mm
Business card, 90 × 54 mm96 × 60 mm
Square, 210 × 210 mm216 × 216 mm

Step by step

  1. Set up the frame

    For route B, extend the background to the edges of the larger frame and center the design in it, because Print-Ready centers the finished size on the page. Do not rely on artwork hanging outside the frame: the PDF page is the frame, so that artwork is not a reliable source of bleed.

  2. Export a PDF

    Select the frame. In the Export section at the bottom of the right sidebar, choose PDF. Figma's help says PDFs export at Medium quality by default and at 1x only. Check the quality setting in the export options, and place photos large enough for the printed size. Figma to print-ready CMYK PDF covers several frames and color profiles.

  3. Check the PDF page size

    Figma works in pixels and print works in millimeters or inches, so open the PDF and read its page size in the document properties. Print-Ready does not scale pages. If the size is wrong, resize the frame in Figma and export again.

  4. Drop it on Print-Ready and set the finished size

    The check runs in your browser and nothing is uploaded yet. For route A, the cut line should already be at the page edge. For route B, enter the real size under Cut size. The artwork around that size serves as bleed. Entering a size smaller than the page only moves the cut, so a design that is not centered gets cut in the wrong place.

  5. Set the crop marks

    Print for: Print shop starts with crop marks on and Online printing service starts with them off. With marks on, the page is 19.05 mm larger than the finished size on each side. Marks can be registration color or black only; ask your printer if they have a preference.

  6. Review, create and download

    Look at the mirrored strips in the preview on route A, and at the cut line on route B. Click Create print-ready PDF, then download the file (no account needed). You can open the file in the Ink Checker to read the ink and the plates.

Figma details the check often brings up

  • Screen colors. Figma's help lists no CMYK profile for export. Print-Ready converts RGB to CMYK for the paper standard you choose.
  • Plus darker and Plus lighter. Figma's help says these blend modes are not supported in PDF exports, so compare the PDF with your frame.
  • Small photos. Because export is at 1x, the photo placed in the frame sets the resolution. See what resolution images need.
  • Black text. With black text on, text that looks black and meets our black-text rule goes to black ink only, and Figma's default black text is treated the same way.

CMYKflow is not affiliated with Figma.

Frequently asked questions

Can Figma export bleed or crop marks?

Figma's help lists no bleed or crop marks option at the time of writing, so check the current export panel. You can build bleed into a larger frame, or add bleed and crop marks to the exported PDF.

Will a custom finished size scale my design?

No. It sets where the cut goes, centered on the page. If the PDF page is smaller than the size you enter, you get a message saying it does not fit. Change the frame in Figma and export again.

Why not let artwork hang outside the frame?

The PDF page is the frame, so that artwork is not a reliable source of bleed. Make the frame larger and extend the background to its edges.

Is the default black text in my Figma PDF handled?

With black text on, Figma's default black text is treated like other black text and goes to black ink only. You can confirm it on the black plate in the Ink Checker.