Bleed, crop marks and print checks
What resolution do images need for print? Check the ppi in a PDF
Short answer: a common target for print is about 300 ppi (pixels per inch) at the size the image is printed, and many printers accept less on some jobs. To check a PDF, you need the image's pixels and its printed size, which Print-Ready reads for you in your browser. Ask your printer if they have their own minimum.
Work it out
Effective ppi is the pixels divided by the printed size in inches:
ppi = pixels ÷ printed inches (printed inches = mm ÷ 25.4)
Take a 3000 × 2000 pixel photo. The same pixels give a different ppi at each size:
| Printed width | Sum | Effective ppi | With default limits |
|---|---|---|---|
| 210 mm (8.3 in) | 3000 ÷ 8.27 | 363 | Not listed |
| 300 mm (11.8 in) | 3000 ÷ 11.81 | 254 | Worth a look |
| 420 mm (16.5 in) | 3000 ÷ 16.54 | 181 | Change in your design |
This is why the number stored in the photo, such as 72 dpi, does not settle the question. Enlarging a photo in your design lowers its ppi even though the file has not changed.
The other way round: if a PDF is too large to send, you can lower only the images that are sharper than you need. Compress PDF with By resolution set to 300 ppi leaves images at or below that untouched and keeps the colors as they are.
How large can a photo print?
| Pixels | Size at 300 ppi | Size at 200 ppi |
|---|---|---|
| 1080 × 1080 | 91 × 91 mm (3.6 × 3.6 in) | 137 × 137 mm (5.4 × 5.4 in) |
| 1200 × 800 | 102 × 68 mm (4 × 2.7 in) | 152 × 102 mm (6 × 4 in) |
| 3000 × 2000 | 254 × 169 mm (10 × 6.7 in) | 381 × 254 mm (15 × 10 in) |
| 6000 × 4000 | 508 × 339 mm (20 × 13.3 in) | 762 × 508 mm (30 × 20 in) |
Pixels for a full-page image
An image that runs off the page has to cover the bleed too. These sizes include 3 mm (or 1/8 in) of bleed on every side and are rounded:
| Finished size | With bleed | Pixels at 300 ppi | Pixels at 200 ppi |
|---|---|---|---|
| Business card 90 × 54 mm | 96 × 60 mm | 1,130 × 710 | 760 × 470 |
| A5 | 154 × 216 mm | 1,820 × 2,550 | 1,210 × 1,700 |
| A4 | 216 × 303 mm | 2,550 × 3,580 | 1,700 × 2,390 |
| US Letter | 8.75 × 11.25 in | 2,625 × 3,375 | 1,750 × 2,250 |
Check the ppi in a PDF
Drop the PDF on the Print-Ready page. The check compares each image's pixels with its size on the page and uses the lower of the width and height figures. If any are low, a Photo at … ppi row shows the lowest figure. Click it to see the photo on the page and the size at which it reaches the sharp limit (300 ppi by default).
- Default limits: under 200 ppi is listed as something to change in your design, and 200 up to 300 ppi as worth a look. For a home or office printer, the figures are 150 and 200.
- Your printer's numbers: enter them under Advanced in the Settings tab. This changes what gets listed, not how the photo prints.
- Not measured: vector art has no ppi, and images with a side of about 10 pt (3.5 mm) or less, and images stored directly in the page's drawing code, get no figure. Text inside a photo is judged as part of the photo.
- Line art: black-and-white line art (1-bit images) is often asked for at a higher resolution, so ask your printer. The check applies the same limits to every image.
Why it cannot be fixed automatically
The detail was never captured, or it was lost before the PDF was made. Enlarging an image adds pixels but does not bring that detail back, so Print-Ready does not try to. It reports the image instead. Your choices are in what to do about a low-resolution warning. If you start from a JPG or PNG, its resolution sets the print size: JPG to print-ready PDF shows how.
Frequently asked questions
Is 72 dpi too low for print?
That number alone does not tell you. A photo's stored dpi value says little. What counts is how many pixels it has and how large it is printed. A 6000 × 4000 pixel photo labeled 72 dpi can still print sharply at a moderate size.
What is the difference between ppi and dpi?
Ppi counts the pixels in an image per inch of printed size. Dpi strictly describes the dots a printer makes, but many people and tools use it to mean ppi. If a printer asks for 300 dpi images, they usually mean 300 ppi at the printed size.
Is 300 ppi required?
No. It is a common target, not a rule. Print-Ready looks for 300 ppi and lists images under 200 ppi as something to change, by default. Your printer may accept less, especially on large items viewed from a distance.
Can Print-Ready raise the resolution?
No. It tells you the ppi and the size at which the photo would be sharp. To raise the ppi, use a larger original or print the photo smaller.