Bleed, crop marks and print checks
JPG to print-ready PDF with bleed and crop marks
Short answer: drop the JPG on the Print-Ready page. It becomes a one-page PDF in your browser, and you set its print size with the image resolution. Then bleed, crop marks and CMYK are added when you create the file. How big it can print depends on its pixels, so work that out first.
Work out the print size first
Print size in inches = pixels ÷ ppi (pixels per inch). Multiply by 25.4 for millimeters. The ppi does not change the picture, only how tightly its pixels are packed on paper.
| Image | At 300 ppi | At 200 ppi |
|---|---|---|
| 1200 × 800 px | 102 × 68 mm | 152 × 102 mm |
| 3000 × 2000 px | 254 × 169 mm | 381 × 254 mm |
| 6000 × 4000 px | 508 × 339 mm | 762 × 508 mm |
Going the other way, an A4 page with 3 mm bleed on every side is 216 × 303 mm, or about 2551 × 3579 px at 300 ppi. By default the check warns under 200 ppi and looks for 300 ppi. These are common values and this tool's defaults, not a standard. Viewing distance matters, so a large poster can often use fewer. More in image resolution for print.
Make the PDF
-
Start from the largest version you have
Print-Ready cannot add detail to a small image. A JPG saved from a website or a screenshot is often too small for print, so go back to the original if you can.
-
Drop it on the page
The file stays in your browser while it is checked and previewed. The page starts at the size your file says. If it gives no resolution, or one under 100 ppi, it starts at 300 ppi.
-
Set the print size
Open the Settings tab and change Image resolution. Fewer ppi makes a bigger page, and the check updates. Under Print for, choose a print shop for crop marks, or an online printing service for no marks, as your printer asks.
-
Decide how to get bleed
By default, each picture edge is mirrored outward (Mirror edges), or continued with Smart extend if you choose it, by your bleed size, 3 mm unless you change it. If the picture is larger than the finished size, there is a better way below. White edges are treated as paper and get no bleed.
-
Check the preview, then create the PDF
Look at the mirrored strips and at anything close to the edge. Then click Create print-ready PDF. This is when the file is uploaded. Then download it. No account is needed to download it; sign in (free) to keep your files for 7 days.
A better source of bleed: a little extra picture
If your image has room to spare, you can use real picture for the bleed instead of mirroring. Say your image is 3000 × 2000 px at 300 ppi, so 254 × 169 mm, and you want a 210 × 148 mm card. Under Cut size, set a Custom size of 210 × 148 mm. It is centered on the page, leaving about 22 mm and 11 mm of spare picture around it, so the bleed comes from your own image. The rest is cut away, and since the picture is centered, what sits near its edges goes first. A finished size bigger than the page will not fit and is refused.
What a JPG can't tell the check
A JPG is a flat grid of pixels, so several things work differently than with a design-tool PDF:
- Text is pixels. Fonts, small text and text near the cut read as passed because there is no text for the check to find. Look at it yourself.
- Mirrored strips include any lettering. In a PDF the mirrored copy leaves live text out. In a JPG, text is part of the picture, so it gets reflected too.
- Black text stays as the image's colors. Dark letters in a color JPG usually print in several inks, so small type can look soft. A PDF exported from your design tool usually gives a cleaner result.
- Compression stays. Blocky JPG artifacts are not cleaned up, and low-resolution photos are not sharpened.
If you have a transparent image, see PNG to print-ready CMYK PDF. TIFF files cannot be used here; to read the ink of a TIFF, drop it on the Ink Checker.
Frequently asked questions
How large can the JPG be?
Up to 300 MB and about 1,000 megapixels. An RGB or gray JPG that has to be turned upright, because of its rotation setting, has a limit of about 50 megapixels.
What if my JPG has no resolution set?
If the file gives no resolution, or one under 100 ppi, Print-Ready starts at 300 ppi. You can change it under Image resolution, and that changes the print size.
Does a higher ppi make my photo sharper?
No. The pixels stay the same. Changing the ppi only changes how large they print: a higher number gives a smaller, denser print, and a lower number gives a larger, softer one.
Will text in my JPG be checked?
No. Text in a JPG is just pixels, so the font, small-text and text-near-the-cut checks have nothing to read, and a passed line there means little. Look at it yourself in the preview.