Bleed, crop marks and print checks

Registration color in artwork: why it prints muddy

Updated · 3 min read

Short answer: registration color prints at full strength on every plate, which suits crop marks and is a problem for artwork. Text or shapes set in it look black on screen, but on press they carry every ink at once, so they can print muddy with blurred edges and far too much ink. Change it to a normal color in your design.

Registration is not black

ColorC / M / Y / KTotal inkUse it for
Registration100 / 100 / 100 / 100400%, plus any spot platesCrop marks and other printer's marks
Plain black0 / 0 / 0 / 100100%Small text, thin lines, barcodes
Rich blackBlack plus some C, M and Y; ask your printer for a recipeWithin your printer's limitLarge dark areas

Registration exists so that printers can see whether the plates line up: a mark that appears on every plate shows any shift at once. It does this job outside the finished page, where it is trimmed away. A common ink limit is around 300%, so artwork at 400% is well over it. A tint of registration color has the same problem at a lower strength, because it still uses every plate.

What goes wrong on the page

  • Blurry small text. Four plates rarely line up exactly, so letters can get colored edges.
  • Heavy, slow-drying ink. That much ink in one spot can smudge or transfer to the next sheet.
  • Ink on spot plates too. It also puts ink on every spot plate in the job.

How it gets into a file

In layout and vector apps that offer it, it is usually a swatch named Registration, often next to black in the list. It is easy to click by mistake. It can also arrive with a placed logo, a supplier's template, or a page imported from another PDF, so you may not have picked it yourself.

Find it and change it

  1. Find it. Drop the PDF on the Print-Ready page. If artwork uses registration color, the list has a Registration color used row under Change in your design. Click it to see the place on the page. A color built by hand at 100/100/100/100 is not recognized as registration, but it can show up as too much ink. You can also open the PDF in the Ink Checker: a view of each plate shows registration objects on every one.
  2. Change it in your design. Select the object and set a normal color: black ink only (0/0/0/100) for text and thin lines, or your printer's rich black for a large dark area. If it came from a placed logo or template, fix the source or ask whoever supplied it for a corrected version.
  3. Export and check again. Print-Ready only reports registration color, so the new file has to come from your design. If it still appears, look in placed files and on master pages or templates.

When the list shows your crop marks

The check looks at objects on the finished page, so marks outside the cut are not a problem. But if a PDF has its own crop marks and no trim box, the whole page counts as finished, and those marks can be listed. Set the real finished size under Cut size, and the check runs again from that cut line. How to add crop marks covers what happens to marks when you create the PDF.

The marks Print-Ready adds use registration color by default. Some printers ask for black only, which you can set under Mark color. A question you can copy: "Should crop marks be in registration color or black only?"

Frequently asked questions

Why does registration color look black on my screen?

Apps usually draw it as black or near black on screen, which makes it easy to pick by mistake. On press it puts every ink on the paper, not just black ink.

Can Print-Ready change it to black?

No. It reports where registration color is used, and you change it in your design.

Are the crop marks Print-Ready adds in registration color?

By default, yes, because that is what crop marks are for. If your printer prefers otherwise, set Mark color to Black only (K).

Will my existing crop marks be listed as a problem?

The check looks at objects on the finished page. Marks outside the cut are not listed if the file has a trim box or you set the finished size.