Bleed, crop marks and print checks
Print-ready PDF checklist: every check, in plain words
Short answer: before you send a PDF to print, go through 20 things: the cut and bleed, the colors and ink, the images and fonts, and anything hidden in the file. Below is each check and what can go wrong if you miss it. It is the list Print-Ready runs in your browser. On screen, problems are sorted into these groups, and a group appears only when something is in it.
We'll fix when you create the PDF (8)
| Check | What can go wrong | What happens to it |
|---|---|---|
| Bleed | Artwork stops at the cut, so a thin white line can show after cutting. | Artwork already past the cut is kept. Picture edges are mirrored by default (or continued with Smart extend, or left as they are, if you choose), and edges without a picture are always mirrored (a flat color stays the same color). |
| Trim and bleed boxes | The file does not say where to cut, so the printer has to guess. | Both boxes are set. |
| White set to overprint | The white object vanishes when printed, because there is no white ink to print on top. | Overprint is turned off for it. White in patterns and Type 3 fonts is not covered. |
| Small text in four-color black | Four plates rarely line up exactly, so small letters can look blurry. Small means under 12 pt by default. | Text that looks black and meets our black-text rule becomes black ink only. Some deliberate rich blacks stay. |
| Screen (RGB) colors | Bright blues and greens may print duller. | Converted to CMYK for the paper standard you choose. |
| Comments and form fields | A PDF viewer may hide them, but a printing system may print them on the page. | Removed. |
| Scripts and attachments | They do nothing in print, and some printing systems reject them. | Scripts are removed. Attached files stay. |
| Total ink | Too much ink dries slowly and smudges. | Less ink caps converted colors at your limit (300% by default). This is not measured again afterward, so confirm in the Ink Checker. With Less ink off, this check moves to "Worth a look". |
Change in your design (6)
Change these in your design file and export again.
| Check | What can go wrong |
|---|---|
| Image resolution | A photo looks soft at its printed size. Under 200 ppi it is listed here by default. From 200 up to 300 ppi it is listed under "Worth a look". |
| Fonts included | The printer's computer swaps in another font, so the letters change. |
| Text near the cut | Text can be cut off or look crooked. The default safe area is 3 mm, or 5 mm for booklets and home or office printers. |
| Very thin lines | Lines under 0.25 pt, the default limit, can break up or disappear. |
| Registration color | It prints in every ink, so artwork set in it looks muddy. |
| Page count | A saddle-stitched booklet needs a multiple of 4 pages, because each sheet folds into 4 pages. |
Worth a look (6)
These are often fine. Compare them with what your printer expects.
| Check | Why it is listed |
|---|---|
| Spot colors | Each special ink is an extra plate, and can be an extra cost. |
| Page sizes | Different sizes are right for some jobs and a mistake in others. |
| Transparency | Fine for most printers. Some older workflows need it flattened. |
| Blend modes | Multiply, Overlay and similar modes mix ink values, so less ink can change how those colors look. |
| Leftover color settings | A file can carry old settings that make some printers read its colors differently. |
| Hidden layers | Hidden layers are still in the file, so check them. |
A PNG with transparent areas gets one more note: those areas became white.
What this list does not cover
- Barcodes, QR codes and die lines. Not checked. Ask your printer how they want them set up.
- Some checks on some jobs. Page count runs only for saddle-stitched booklets. Home or office printing skips bleed, page boxes and total ink. Anything that could not be read shows as not checked.
- Your printer's own rules. "Nothing to fix in the checks we ran." covers only those checks. Your printer can have other requirements.
To run the list on your own file, follow how to check a PDF in your browser.
Frequently asked questions
How many checks are there?
20. Barcodes and QR codes, and die lines, also appear in the list, but they are marked as not checked.
Do all 20 checks run on every file?
No. Page count runs only for saddle-stitched booklets. With Home / office printer selected, bleed, page boxes and total ink are not checked, and choosing No bleed also skips bleed and page boxes. Anything that cannot be read is marked as not checked, not as passed.
Does a clean list mean my printer will accept the file?
No. It means nothing was found in the checks that ran. Your printer has its own requirements and its own check.
Can I change the limits?
Yes. In the Settings tab, under Advanced, you can change the image resolution, small text size, thinnest line and safe area. The total ink limit is under Color & ink. If your printer gave you numbers, use theirs.