Bleed, crop marks and print checks

How to add bleed to a PDF without the original design file

Updated · 3 min read

Short answer: you do not need the design file. Bleed can be built from the PDF itself: artwork that already runs far enough past the cut is kept, and other edges with artwork are mirrored outward. If you can still open the design, though, extending the background there and exporting again usually gives a more accurate result.

What each edge gets

Bleed is artwork that runs past the cut line, so no white shows if the cut lands slightly off. Print-Ready looks at each edge of each page separately:

What is at the edgeWhat happensWhat to look at
Artwork already shows far enough past the cutIt is kept, and only the page boxes are setThat the finished size is right
A picture stops at the cutThe edge is mirrored outward, without the live textThe striped strips in the preview
A flat color, gradient or drawn shape stops at the cutIt is mirrored outward too, and this cannot be switched off. A flat color stays the same color. A thin border or small shape near the edge is reflected as well.Any border or shape near the edge
White paper, no artworkNothing is added, because there is nothing to run off the pageThat the white is intended

If the artwork shows past the cut but not by the full bleed, that edge is treated as having no bleed and is mirrored, which replaces the partial bleed.

Add the bleed

  1. Drop the PDF on the page

    Drop the file on Print-Ready. It is checked in your browser, and nothing is uploaded yet.

  2. Confirm the finished size

    Compare Cut size with the size you ordered. If the file does not mark the cut, the whole page is taken as the finished size, so a page that already includes bleed needs the real size typed in.

  3. Set the bleed your printer asked for

    Choose who prints it under Print for. The starting choice, Print shop, also turns Crop marks on, so the page comes out 19.05 mm larger than the finished size on every side. If your printer wants bleed only, choose Online printing service or untick Crop marks. Then pick 3 mm, 1/8 in, 5 mm or a custom size up to 5 mm under Bleed.

  4. Look at the mirrored strips

    In the After fixes view, added bleed is striped, with a dashed outline. The preview draws the bleed for the first 12 pages that need it, and always draws picture edges mirrored, even where your PDF continues the picture with Smart extend. So open the download and look at the edges. Picture edges are mirrored by default (Mirror edges). If a picture strip looks wrong, set Picture edges to Smart extend to continue the picture instead (see Smart extend vs Mirror edges), or to Leave as they are, which gives that picture edge no added bleed; edges without a picture are still mirrored.

  5. Create the PDF and download it

    Click Create print-ready PDF (or Create PDF if something is left to change in your design). The file is uploaded now. Then download it. No account is needed to download it; sign in (free) to keep your files for 7 days.

When building bleed from the PDF falls short

  • Something important touches the edge. A face, a hand or a product cut off by the page edge mirrors into an odd shape. Mirrored bleed explained shows when that matters.
  • The picture continued in your design. If a frame cropped a larger photo, only what shows on the page counts. With Mirror edges, the hidden part stays hidden and the edge is mirrored. With Smart extend, the hidden part of the picture is brought back where it reaches far enough, and the rest of the edge is continued from the picture. The preview still draws these strips mirrored, so check them in the downloaded PDF.
  • Very narrow pages. An edge too short to mirror is left as it is, with a warning.

What else changes in the file

Print-Ready makes a complete file for print, not only bleed: the colors are converted to CMYK and Less ink is on by default. Less ink also changes colors that are already CMYK. If you want the colors handled as little as possible, switch Less ink off: screen colors are still converted to CMYK, and existing CMYK colors keep their values, apart from the black-text fix if it stays on. The full list of fixes is here.

The preview is approximate and is not a proof. If your printer has a template or an upload size rule, follow that first.

Frequently asked questions

Does adding bleed make the PDF page bigger?

Yes. The finished size stays the same and the page grows around it. An A4 page with 3 mm bleed and no crop marks becomes 216 x 303 mm. With crop marks on, which is the starting choice for Print shop, the page is 19.05 mm larger than the finished size on every side (248.1 x 335.1 mm for A4).

Will my text be mirrored into the bleed?

Live text is not. The mirrored copy leaves it out. Text that is part of a picture, or text that was turned into shapes, counts as artwork and can appear in the mirrored strip, so check the preview.

Can I add more than 5 mm of bleed?

Not in Print-Ready. The range is 0 to 5 mm. If your printer asks for more, extend the artwork in your design file.

Do I need an account?

No account is needed to check and preview a file. The finished PDF can be downloaded without one too; sign in (free) to keep your files for 7 days.