Bleed, crop marks and print checks
Adobe Express and Kittl PDFs: check before you send them to print
Short answer: check the cut line, the bleed, the image resolution and the colors in the exported PDF, because the two tools hand you different things. Adobe Express has print options for bleed and crop marks in its download panel. For Kittl, we found official help on CMYK and DPI but no instructions for bleed or crop marks, so check its export panel.
What each tool's help says
| Adobe Express | Kittl | |
|---|---|---|
| Bleed | File → Bleed and margins, and Show bleed when downloading | No official instructions found. A Kittl post from January 2026 lists bleed settings as coming soon, so check the current export panel. |
| Crop marks | Add crop marks when downloading | No official instructions found. Check the export panel. |
| Margins | Show margins, with values for each side | Margin lines are a visual guide and do not appear in the exported file |
| Print PDF setting | PDF Print as the file format | PDF in the export panel, with 300 DPI suggested for print |
| CMYK | Defaults to CMYK, with an RGB option if your printer manages the color | For PDF and JPEG; PNG and SVG stay RGB |
| CMYK profile | Preselected by region, shown under Advanced settings (not in RGB mode) | US Web Coated (SWOP) v2 |
This reflects each tool's help at the time of writing. Check the current menu, since these options can change. For the export steps, see Adobe Express: download a PDF for print and Kittl and other design tools.
What to check in an Adobe Express PDF
- Where the cut line is. With bleed and marks on, the page is larger than the finished size. In the Print-Ready preview the cut line should sit at the finished size. If it sits at the outer edge of the page, set Cut size to the real size.
- Whether the artwork reaches the bleed. A bleed setting only helps if the background actually runs into it. If artwork stops short, the check reports the gap.
- Which profile was used. If the color mode is CMYK, open Advanced settings to see the profile Express picked, and compare it with what your printer asked for.
What to check in a Kittl PDF
- Bleed. If the PDF has no artwork past the cut, the check reports it. You can make the artboard larger by hand and set the finished size later, or let Print-Ready make the bleed from the edge (a mirror by default, or Smart extend for picture edges if you choose it). Adding bleed to a PDF explains the limits of that.
- Text near the edge. Margin lines are not in the exported file, so nothing in the PDF shows where you meant to stay inside. The check measures live text against the cut: 3 mm by default, which your printer may want larger. Text turned into outlines and logos are not measured. Text too close to the cut has more.
- The CMYK profile. A CMYK export is made for SWOP v2, a different printing condition from the GRACoL and Fogra standards Print-Ready offers. Its colors are not converted to another CMYK standard, though Less ink, on by default, can still lower the ink in dark and neutral areas. If your printer names one of those standards, an RGB export lets the conversion target it. RGB vs CMYK explained says why.
What to check in both
These do not depend on the tool, and the check covers them:
- Photos: the check gives the ppi at the printed size.
- Fonts: any font not included in the PDF is named.
- Black text: small text below 12 pt, by default, is flagged when it is built from four inks.
- Total ink: Less ink is on by default. Open the finished PDF in the Ink Checker to confirm the ink, as the result is not measured again after it is made.
The check runs in your browser and needs no account, so you can look at a file before deciding whether to change anything. Your printer's own requirements still come first, and barcodes, QR codes and die lines are not checked.
CMYKflow is not affiliated with Adobe Express or Kittl.
Frequently asked questions
Does Kittl export bleed and crop marks?
We did not find official Kittl instructions for this. Its CMYK export post and its export help do not mention them, and a Kittl post from January 2026 lists bleed settings as coming soon. Check the current export panel.
Can I use a CMYK PDF from Adobe Express or Kittl?
Yes. Colors that are already CMYK are not converted to another CMYK standard. Less ink, on by default, can still lower the ink in dark and neutral areas. If your printer names a paper standard, ask whether an RGB export converted to that standard suits them better.
Should I export a PNG from Kittl instead of a PDF?
Kittl's help says PNG exports are RGB only, and a PNG turns text into pixels. Print-Ready accepts PNG, but a PDF is usually the better choice. Transparent areas of a PNG become white.
If Adobe Express already added bleed and marks, do I still need Print-Ready?
Not if the check finds nothing to change and the file is what your printer asked for. You can check it in your browser without creating anything.