Bleed, crop marks and print checks
Text too close to the cut: safe area explained
Short answer: keep text inside a safe area, commonly at least 3 mm (about 1/8 in) in from the cut, or 5 mm for saddle-stitched booklets. These are common values, not a standard, so your printer's number comes first. Cutting machines can shift a little from sheet to sheet, and text next to the cut is what suffers when they do.
Why near the edge goes wrong
Two different things can happen:
- The text is cut off. This takes a shift large enough to reach the letters.
- The text looks crooked. This is easier to trigger. Take a line of text 2 mm from both the left and right edges. If the cut moves 1 mm, one side is now 1 mm and the other 3 mm, so one margin is three times the other. Readers can notice this even when nothing is cut.
With text well inside the page, the same movement is much harder to see. Small items feel this most, because the margin is a large share of the card.
How much room is left
The safe area comes off all four sides, so it takes twice the margin from each dimension:
| Finished size | With 3 mm (or 1/8 in) safe area | With 5 mm safe area |
|---|---|---|
| Business card 90 × 54 mm | 84 × 48 mm | 80 × 44 mm |
| Business card 85 × 55 mm | 79 × 49 mm | 75 × 45 mm |
| Business card 3.5 × 2 in | 3.25 × 1.75 in | 3.11 × 1.61 in |
| A5 148 × 210 mm | 142 × 204 mm | 138 × 200 mm |
Text that often ends up outside it: page numbers, website addresses, phone numbers on business cards, and legal lines along the bottom.
Which number to use
| Job | Default in Print-Ready | Why it may differ |
|---|---|---|
| Print shop or online printing service | 3 mm | Many printers publish their own margin, so check their template or specification. |
| Saddle-stitched booklet | 5 mm | Pages are folded and trimmed together, and inner pages can shift outward in thicker booklets. |
| Home or office printer | 5 mm | Many of these printers cannot print all the way to the paper's edge. |
A question you can copy: "What safe margin do you need from the trim line for text on this job?" To use their number, change Safe area under Advanced in the Settings tab.
Check it, then fix it in your design
Set the right finished size first, because the distance is measured from the cut. Then drop the PDF on the Print-Ready page. If text is too close, the Text close to the cut row gives the closest distance, and clicking it shows you the place. Print-Ready does not move text, so that part is yours: move or resize it in your design, export again and check the new file.
The check measures live text it can place on the page. Text it cannot place, logos, text converted to outlines, text inside pictures, and thin frames are not measured. Turn on the Safe area guide in the preview and look at them yourself. Outlined text and text inside pictures near the edge can also be mirrored into the bleed, so look there too. Borders close to the edge deserve special attention, because any shift makes the uneven margin obvious.
A very large word that runs off the page on purpose will also be listed. That is fine if it is your design. Just be sure the cut will not change how it reads.
Bleed goes the other way, outward past the cut. If a white line is your concern rather than text, see why a white line shows after cutting.
Frequently asked questions
What is the difference between bleed and safe area?
Bleed lies outside the cut: artwork runs past the line so no white shows. The safe area lies inside the cut: text and key details stay within it so they are not trimmed or crowded.
Can Print-Ready move my text?
No. It tells you which text is too close and how far it is from the cut. Move it in your design and export again.
Is 3 mm always enough?
No. It is a common value and the default here for most jobs. Booklets and home or office printers use 5 mm by default, and your printer may ask for more. You can change the value under Advanced in the Settings tab.
Does the check look at logos too?
No. It measures live text it can place on the page. Logos, text converted to outlines and text inside pictures are not measured, so use the Safe area guide in the preview to check them by eye.