Bleed, crop marks and print checks
Book cover PDF for print-on-demand: what the check can and cannot tell you
Short answer: a PDF check can tell you about bleed, photo resolution, fonts and ink on a book cover, but not whether your spine is the right width or your layout matches the platform's template. Those come from your print-on-demand platform's specification, which outranks anything here. We do not list platform sizes because they differ and can change.
What the check can and cannot tell you
| Question | Can Print-Ready tell you? | Where the answer is |
|---|---|---|
| Does the artwork reach past the cut? | Yes, against the finished size you set | The check |
| Is the cover photo sharp enough at this size? | Yes, it gives the ppi. By default it warns under 200 and looks for 300. | The check, then the platform's minimum |
| Are fonts included? | Yes | The check |
| Is text too close to the outer cut? | Partly. It measures live text against the outer cut. Titles turned into outlines, logos and text inside images are not measured. | The check, then the platform's safe margins |
| Is the spine the right width? | No | The platform's calculator or template |
| Is spine text centered and clear of the folds? | No. Safe area is measured from the cut only. | The template and your own eyes |
| Is the back, spine and front arrangement right? | No | The template |
| Is the barcode readable and in the right place? | No, barcodes are not checked | The platform's specification |
| Does the file meet the platform's PDF rules? | No, including PDF/X | The platform's validation |
Set the finished size from the template
A cover for print-on-demand is often one wide page: back, spine and front together. The finished width is a number your platform gives you, because it depends on your trim size, page count and paper. Do not work it out from a generic chart.
- Get the full cover size from the platform's template or calculator.
- Enter it under Cut size as a Custom size. It sets the cut, centered on the page, so the design must be centered too. It does not scale the design. The size cannot be bigger than the PDF page, so export the cover with the bleed included.
- Set Bleed to the platform's value. The range here is 0 to 5 mm.
- Choose Print for: Online printing service if the platform does not want crop marks. It starts with marks off.
Then compare the page size of the finished PDF with what the specification asks for, including whether their stated size includes the bleed.
Three book cover traps
- Template guides left in the artwork. If you placed a template as a layer, make sure it is gone before export. The check does not recognize template guides as a problem, and they can print. A hidden layer gets a mention, but a visible one looks like artwork.
- Made bleed on a wrap. Print-Ready can make bleed from the page edges: picture edges are mirrored by default, or continued with Smart extend if you choose. That is often acceptable on textured backgrounds, but look closely at it if a figure or title art runs off the edge. Mirrored bleed explains when to rework the design. Bleed is made only on the outer edges of the page; the spine and folds are not treated differently.
- Paper assumptions. Print-Ready's paper standards are for coated paper. A platform may print covers under its own color conditions, so read what it recommends for color and ink, and set a matching limit if it gives one. Then open the finished PDF in the Ink Checker, because the result is not measured again after it is made.
Use the check and the platform's tools together
A sensible order is: build the cover on the platform's template, export a PDF, run the check in your browser to catch photo, font and ink problems, then upload the final file to the platform and look through its previewer. The platform's previewer is where spine and placement problems tend to appear. If you are unsure, write to their support with the numbers:
- Trim size, page count and paper you chose
- Full cover size and bleed you used
- Whether crop marks are allowed
- Any total ink limit or required PDF standard
Frequently asked questions
Can Print-Ready tell me if my spine width is right?
No. Spine width depends on your page count and paper, and it comes from your print-on-demand platform. The check does not know where the spine is.
Should a book cover have crop marks?
Follow your platform's specification and ask whether crop marks are allowed. In Print-Ready, Print for: Online printing service starts with crop marks off.
Does a clean check mean the platform will accept my cover?
No. It means no problems were found in the checks that ran. The platform has its own rules and usually its own file validation, and those decide.
Can I use it for the book interior too?
Yes, as a separate file with its own specification. Interior pages get bleed on three edges, not the spine side: set Bleed on to Book pages (see the guide to book interior bleed). Print-Ready does not impose pages, and page count is only checked for saddle-stitched booklets.