Check your PDF before printing

Check the total ink of a CMYK TIFF, spot channels included

Updated · 3 min read

Short answer: drop the TIFF on the Ink Checker. A CMYK TIFF is read as it is: the total ink and the value of each plate are the numbers written in the file, with no color conversion. Spot channels saved from Photoshop show up as spot plates of their own name. RGB TIFFs, JPGs and PNGs are shown with the ink they would have after conversion to the paper you pick.

What is read from a TIFF

In the TIFFWhat the Ink Checker shows
CMYK channelsCyan, magenta, yellow and black exactly as stored, and their sum as total ink
Spot channels (saved as spot colors in Photoshop)A spot plate each, with its name and display color; not counted in total ink unless you tick Count spot plates in the total (on a phone: Count spot inks in total ink)
Transparency, alpha channels, saved selectionsLeft out; the line under the file name says so
RGB channelsConverted to the paper standard you pick, then read
GrayscaleBlack ink only
Embedded color profileUsed to convert RGB; a CMYK TIFF's values are taken as they are

The page size comes from the TIFF's resolution. A file that says less than 100 ppi, or nothing, is laid out at 300 ppi, the same rule as for JPG and PNG. The page size does not change the ink figures.

Step by step

  1. Go to the Ink Checker and drop the TIFF on the page, or choose it from your computer. A large TIFF takes a few seconds to be made into a page; the file stays in your browser.

  2. Read the line under the file name. It says what kind of TIFF it is, which spot channels were found, and anything that was left out.

  3. Pick your paper standard and the ink limit your printer gave you in Plates & heat map. The highest total ink of the page is the Max ink on this page line in the same panel; tick the heat-map box to mark the areas over the limit.

  4. Untick plates to hide them, or click a plate's name to see it on its own. Hover or tap the picture to read the ink at that point.

What we measured

On a test TIFF of 1200 × 900 pixels with known values: a block of C80 M70 Y60 K90 (300%), a block of C100 M100 Y100 K100 (400%), a block of C50, and a spot channel named Green at 100% on one area and 50% on another.

ReadingExpected from the fileInk Checker
Highest total ink400%400%
Share of the page over 300%22.2%22.3%
Average cyan / magenta / yellow / black45.6 / 37.8 / 35.6 / 42.2%46 / 38 / 36 / 42%
Spot plate Green, average and highest20.8% / 100%21% / 100%

A 500 MB CMYK TIFF (125 megapixels) took about 16 seconds to open on a desktop computer. The readings are as close as for a PDF: each ink to within about 2%, and the highest total ink only counts areas about 1 mm across or larger, so single noisy pixels do not raise it.

Things to know

  • Compression. Save the TIFF with LZW or ZIP (or none). A TIFF with JPEG compression is refused; so are BigTIFF files and floating-point TIFFs.
  • Size. Up to 500 MB and 300 megapixels. A file larger than that is refused before it is read.
  • Layers. The flattened image of the TIFF is read; layers saved inside it are not.
  • Too much ink? The Ink Checker only reads. Less Ink on CMYKflow takes PDF, JPG and PNG files; for a TIFF, use GCRflow (gcrflow.com). For a PDF, see reducing ink in a CMYK PDF.

For what the total ink figure means and which limit to use, see total ink coverage. The same reading for a PDF is in checking the total ink coverage of a PDF.

Frequently asked questions

Is the TIFF uploaded?

No. The TIFF is read and made into a page in your browser, and the inks are read there too. Nothing leaves your computer unless you choose to convert a file afterwards.

Why is my RGB TIFF showing CMYK ink?

An RGB picture has no ink yet. The checker shows the ink it would have after conversion to the paper standard you pick, the same way it shows RGB pictures inside a PDF. A CMYK TIFF is read as it is.

My spot channel is missing. Why?

Only channels saved as spot colors are read as spot plates. A saved selection or an alpha channel is not ink, so it is left out, and so is transparency; the line under the file name says when that happened. A grayscale TIFF prints in black ink only, and its extra channels are left out too.

Which TIFFs can it read?

CMYK, RGB and grayscale TIFFs with 8 or 16 bits per channel (1-bit grayscale too), saved with LZW, ZIP, PackBits or no compression, up to 500 MB and 300 megapixels. A TIFF with JPEG compression, a BigTIFF, a floating-point TIFF or another color model (such as Lab or indexed colors) is refused with a message; save it again as CMYK, RGB or grayscale with LZW or ZIP. In a TIFF with several images, the first one is read.