Bleed, crop marks and print checks

Low-resolution warning on a PDF: what to do

Updated · 3 min read

Short answer: replace the image with a larger original, or print it smaller. Those are the two real fixes. No setting in a finished PDF can add detail that is not there, so Print-Ready reports the image and does not try to sharpen it. Which fix you need depends on where the image came from.

Find where it came from

SourceWhy it comes out low-resolutionWhat to do
Saved from a website or social mediaIt was sized for screens and often compressed.Ask the owner for the original, or buy or license the full-size version.
ScreenshotIt only has as many pixels as were on the screen.Export from the source app, or rebuild the graphic in your design.
Logo from a website or email signatureIt is a small picture of a logo.Ask for a vector version (SVG, PDF, AI or EPS), which has no ppi limit.
Photo sent through a chat appMany apps shrink photos when sending them.Ask for it again as a file or document, or by email or cloud link.
Stretched or cropped in your designThe pixels now cover more paper.Make it smaller, crop less, or use a larger original.
Reduced on exportSome PDF presets compress or downsample images to make the file smaller.Export again with a print-quality preset. Check the current menu in your tool. If the file is then too large to send, use Compress PDF at 300 ppi instead of a smaller export preset.

Decide in three steps

  1. Read the numbers. The Photo at … ppi row shows the lowest ppi in the file. Click it to see that photo and the size at which it would be sharp, for example "sharp up to 102 × 68 mm".
  2. Compare with your original. If the original has plenty more pixels than the PDF suggests, the export is the likely cause, so look at the export settings. If not, the image itself is too small. The ppi guide has the sum and size tables.
  3. Pick a fix. Replace the image, or in your design make it no larger than the sharp size shown (worked out at the sharp limit, 300 ppi by default) or the size your printer accepts. Export again and drop the new PDF to check it.

When it is a judgment call

A warning is about a number, and how much it matters depends on the image and the job:

  • Usually shows more: logos, small text inside an image, line art, faces, and anything people read up close.
  • Usually shows less: soft backgrounds, blurred textures, and large items viewed from a distance.

The list separates the two levels. By default, under 200 ppi appears under "Change in your design", and 200 up to 300 ppi under "Worth a look". You can still create the PDF with either, but the photo will not get any sharper. If you are unsure, ask your printer: "This photo is 170 ppi at its printed size on a poster. Is that acceptable for this job?"

If your printer gives you a lower minimum, enter it under Advanced in the Settings tab. Do not lower the limit just to clear the list, because the photo will print the same either way.

About upscaling

An upscaling tool makes the image larger by inventing pixels. The result can look better or worse, and it often changes faces and letters. A higher ppi after upscaling only shows there are more pixels, not that they are sharp, so judge the result at print size or ask your printer for a proof. For a logo or text, a vector version or rebuilding it in your design is usually the cleaner route.

Starting from a JPG or PNG

When the file is a single image, its resolution sets the print size. Fewer ppi means a bigger page, and more ppi means a smaller, sharper one. You can change it under Image resolution; see JPG to print-ready PDF.

Frequently asked questions

Can I ignore a low-resolution warning?

Sometimes. A soft background photo may be acceptable, while a logo or small text inside an image usually shows the problem more. Ask your printer whether the resolution is acceptable for the job, and look at the image at its printed size.

Will an AI upscaler fix it?

It adds pixels, so a check will read a higher ppi, but a higher number does not prove the image is sharp, and the added detail is invented. Look at the result closely, especially faces and text. Print-Ready does not upscale images.

Why did the warning appear when my original photo is large?

The photo may have been reduced on export, or you may have cropped into it and enlarged it. Compare the original's pixels with the size at which the check says it would be sharp, then look at your export settings.

Should I lower the limit to remove the warning?

Only if your printer gave you a lower number. Changing the limit changes what the check lists. It does not change the photo.