Bleed, crop marks and print checks
Spot colors in a PDF: does my printer need them?
Short answer: your printer needs spot colors only if the job is meant to print with an extra ink, such as a brand color, or if the file has a deliberate separate plate or layer for a die line, varnish or white ink. If none of that applies, spot colors in the file are worth raising, because each one can mean an extra plate and extra cost.
What a spot color is
A normal print color is a mix of four inks: cyan, magenta, yellow and black (CMYK). A spot color is one named ink, mixed before printing and given its own plate, the printing surface that carries one ink to the paper. Pantone colors are a well-known example.
In a PDF, a spot color is stored by name, along with a CMYK or similar value that tells screens and CMYK-only devices how to show it. That is why it can look like any other color on screen. Your viewer does not tell you the name unless you look at the plates.
Count the plates
On an offset press, each plate usually needs its own ink unit and setup, so the count is a useful first question.
| What is in the file | Plates | What to think about |
|---|---|---|
| CMYK photos and text | 4 | The usual full-color job. |
| CMYK plus one brand spot color | 5 | Worth it if the exact color matters. Ask for a price with and without it. |
| Black plus one spot color | 2 | A real two-color job, which can cost less than four-color on some presses. |
| CMYK plus the same color under two names, such as PANTONE 185 C and PANTONE 185 U | 6 | Usually an accident. Merge them in your design. |
| CMYK plus a spot named Dieline | 5 in the file | The cut path is for the cutter, not ink. Ask how your printer wants it set up. |
Digital presses differ. Many print CMYK and simulate a spot color with those inks, and some have extra stations. The file can be correct and still not print as a separate ink, so ask rather than assume.
When to keep them and when to remove them
- Keep them when the quote includes that ink, when the brand color has to match a printed standard, or when the plate is a die line, varnish, foil or white ink layer your printer asked for.
- Remove them when they came along by accident, for example from a placed logo or an old swatch, and the job is quoted as plain CMYK.
Some bright oranges, greens and violets cannot be matched with CMYK, so converting a spot color to CMYK can change how it looks. Check with the printer if the color matters.
What to ask your printer
You can copy this and fill in the names:
- "My PDF has these spot colors: ____. Is the job quoted to print them as separate inks, or should they be CMYK?"
- "If you print in CMYK, will you convert them, or should I change them before sending the file?"
- "How should the die line or varnish be named and set up?"
Finding them in your file
Print-Ready lists spot colors by name under Worth a look, as "Special inks". It looks at colors used on the page inside the cut, so an unused swatch or something only outside the cut will not appear there, and a spot color reached through an indexed image may not be listed either. It only reports them: it has no switch to convert them. The Ink Checker shows each spot plate by name, so you can look at what it prints. See how to preview the plates.
Spot colors in vector artwork and text are designed to stay spot colors through the conversion. Images are handled differently: an image with a spot channel (DeviceN) can be rewritten, and its process-color channels can change. So do not take it on trust for your file. After you download the print-ready PDF, open it in the Ink Checker and confirm that the plates are the ones you and your printer expect.
PANTONE® is a trademark of Pantone LLC. CMYKflow is not affiliated with Pantone.
Frequently asked questions
Does a spot color cost more?
It can. On an offset press an extra spot color on top of CMYK usually means an extra plate, which can add cost. A job printed in only black and one spot color uses two plates instead of four, which can cost less. Pricing varies, so ask your printer for a quote.
Will Print-Ready convert my spot colors to CMYK?
No. It lists them under Worth a look and offers no switch to convert them. If you do not want them, change those colors to CMYK in your design and export again, or ask your printer to convert them.
Should a die line be a spot color?
Often, yes. A die line kept on its own named spot plate is easy for the printer to separate from the artwork. Printers name and set up die lines differently, so ask for their instructions. Print-Ready does not check die lines.
How do I see which spot colors are in my PDF?
Open the PDF in the Ink Checker. The Plates & heat map panel lists each spot plate by its name, and you can hide or show each one.