Bleed, crop marks and print checks
Print-Ready, Less Ink or Ink Checker: which CMYKflow tool do I need?
Short answer: use Print-Ready when your printer mentions bleed, crop marks or the cut line, or when you want the whole file checked. Use Less Ink when the page is fine and only the ink or CMYK is the problem. Use Ink Checker when you only want to read the ink and change nothing.
Start from what your printer said
| The printer's words | Start with | Why |
|---|---|---|
| "Please add 3 mm bleed" or "there is no bleed" | Print-Ready | It adds the extra artwork past the cut. See what to do when a printer asks for bleed. |
| "We need crop marks" | Print-Ready | It adds marks at the corners that show where to cut. |
| "The file has no trim box" | Print-Ready | It sets the trim box and bleed box, which tell the printer where the page is cut. See trim box and bleed box. |
| "Too much ink, stay under 300%" | Less Ink | It replaces part of the cyan, magenta and yellow with black in dark and neutral areas, and leaves the page alone. |
| "Send it in CMYK" and nothing else | Less Ink | It converts the colors to the four printing inks. Pick the CMYK only option if you do not want the ink reduced. Choose Print-Ready if bleed or marks are needed too. |
| "What is the maximum ink in your file?" | Ink Checker | It reads the ink and shows each plate, with nothing changed. |
| "The photo is low resolution" or "a font is missing" | Your design tool | No tool here can fix these. Print-Ready's check can show you which photo or font it is. |
| Nothing yet, this is your first print job | Print-Ready | You can check the file and see a preview with no account. |
The question that decides it: should the page change?
Less Ink keeps your page as it is. It does not add bleed or marks and does not change the page size. That suits a file already set up the way the printer wants, where the only complaint is the ink.
Print-Ready rebuilds the page. The page gets larger for bleed and for crop marks if you choose them, and anything past the new bleed is cut away, including old crop marks in the file. That is what you want for a PDF with no bleed. It is more than you need for a file that only has an ink problem.
The three side by side
| Print-Ready | Less Ink | Ink Checker | |
|---|---|---|---|
| Files | PDF, JPG, PNG | ||
| Changes your file | Page and colors | Colors only | No |
| Bleed, crop marks, page boxes | Yes | No | No |
| Reduces ink | Yes, on by default | Yes by default; a CMYK only version does not | No, it only reads |
| Checks resolution, fonts, safe area | Yes | No | No |
| When the file is uploaded | When you create the PDF | When you drop it | Not uploaded |
With Print-Ready and Less Ink, no account is needed to preview or to download the file; signing in (free) keeps your files for 7 days.
When two tools make sense
The common pairing is Print-Ready or Less Ink first, then Ink Checker. Both tools cap converted colors at the ink limit you pick, but that does not mean the whole file is inside the limit, and the result is not measured again afterward. If your printer gave you a limit, open the finished PDF in Ink Checker and read the darkest areas. How to check total ink coverage shows how.
Print-Ready followed by Less Ink is usually unnecessary, since Print-Ready already has the same strength, paper standard and ink limit settings.
Not sure what the printer wants?
Requirements differ from one printer to the next, so a short message can save a round of corrections. You can copy this:
- Do you need bleed, and how much?
- Do you want crop marks, or no marks?
- What is your total ink limit?
- Which paper standard or color profile should the file use?
Their answers tell you which row of the first table you are on. If they ask for something none of these tools do, such as a die line or imposed pages, that work belongs in your design tool or with the printer.
Frequently asked questions
Do I need to run a file through both Print-Ready and Less Ink?
Usually not. Print-Ready has the same Less ink settings, on by default, so one run can add the bleed and reduce the ink. Choose Less Ink on its own when the page should stay exactly as it is.
My file already has bleed and crop marks. Which tool should I use for too much ink?
Less Ink. It works on the colors and does not change the page size or add marks. Print-Ready rebuilds the page: anything past the bleed goes, old crop marks with it, and it adds its own marks if you choose them.
Which tool should I use for a JPG or PNG?
Print-Ready. It turns a JPG or PNG into a one-page PDF in your browser. Less Ink and Ink Checker work on PDFs.
Can any of these tools fix a low-resolution photo or a missing font?
No. Print-Ready's check names the photo or the font, and you change it in your design, then export again.